Connecting From Your House (Via The Network) - Panasonic Lumix DMC-FZ1000 Owner's Manual

12. Using the Wi-Fi function

Connecting from your house (via the network)

You can select the method for connecting to a wireless
access point.
¢ WPS refers to a function that allows you to easily configure
the settings related to the connection and security of wireless
LAN devices.
To check if the wireless access point you are using is
compatible with WPS, refer to the manual of the wireless
access point.
[WPS (Push-Button)]
[WPS (PIN code)]
[From List]
Save push button type wireless access point that is compatible
with Wi-Fi Protected Setup
Press the wireless access point
WPS button until it switches to WPS
mode.
•
Refer to the wireless access point
instruction manual for details.
Save PIN code type wireless access point that is compatible with
Wi-Fi Protected Setup with a WPS mark.
1
Select the wireless access point you are connecting
to.
2
Enter the PIN code displayed on the camera screen
into the wireless access point.
3
Press [MENU/SET].
•
Refer to the wireless access point instruction manual for
details.
Select this option when you are not sure about the WPS
compatibility, or when you want to search for and connect to a
wireless access point.
•
Refer to P290 for details.
289
TM
with a WPS mark.
e.g.: