Panasonic Lumix DMC-FZ1000 Owner's Manual page 347

Hide thumbs Also See for Lumix DMC-FZ1000:
Table of Contents

Advertisement

14.
Others
Motion picture recording stops in the middle.
Depending on the [Rec Format] and [Rec Quality] of a motion picture, the speed class rating
required for the card differs. Use a card that meets the rating. For details, refer to
motion picture recording and speed class
When a card with a slow data writing speed is used, motion picture recording may stop midway.
> If a card on which recording and deleting have been repeated many times or a card that
has been formatted on a PC or other equipment is being used, we recommend that you
make a backup of the data and format
When recording a motion picture, the screen may go dark.
When recording a motion picture, the screen may go dark after a certain period to reduce
battery consumption, but this will not affect the recorded motion picture.
The screen may be blacked out momentarily, or the unit may record noise.
Depending on the environment at the time of motion picture recording, the screen may be
blacked out momentarily or the unit may record noise due to static electricity or powerful
electromagnetic waves (radio towers, high voltage power lines, etc.).
Striping or flicker appears under lighting such as a fluorescent or LED lighting
fixture.
The subject appears distorted.
This is characteristic of MOS sensors which serve as the camera's pickup sensors.
This is not a malfunction.
When a subject moves across the image very fast, the subject may appear slightly distorted.
When noticeable flicker or striping is seen under lighting such as a fluorescent or LED lighting
fixture, you can reduce the flicker or striping by setting up [Flkr Decrease]
shutter speed. It is possible to select a shutter speed from [1/50], [1/60], [1/100], or [1/120].
You can set the shutter speed manually in the Creative Video Mode.
In motion pictures, abnormal clicking and buzzing sounds are recorded.
The recorded sound is very quiet.
When recording in a quiet environment, the sound of aperture, focus or zoom operation may be
recorded in motion pictures.
Focus operation can be set to [OFF] in [Continuous AF] (P214).
While recording motion pictures, plugging the aperture of the microphone with a finger may
reduce the level of audio recording or audio may not record at all. Also be careful because the
operation sound of lenses can easily be recorded at this time.
"
on P30.
(P31)
the card on the unit.
347
"
About the
(P222)
and fixing the
(P118)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents