Panasonic Lumix DMC-FZ1000 Owner's Manual page 357

14. Others
VIERA Link does not work.
•
Is it connected properly with the HDMI micro cable?
• Is the [VIERA Link] on this unit set to [ON]?
> If the input channel does not switch automatically, use the remote control for the TV to
switch it.
> Check the VIERA Link setting on the connected device.
> Turn this unit off and on.
> Set [HDAVI Control] to [Off] on the TV and then turn it back to [On].
(Refer to the operating instructions of the TV for details.)
Cannot communicate with the PC.
• Is the camera recognized by the PC correctly?
> Set to [PC] in [USB Mode]. (P51,
> Turn this unit off and on.
The card is not recognized by the PC.
•
Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
•
If there are two or more USB terminal on a single PC, try connecting the USB connection cable
to another USB terminal.
The card is not recognized by the PC.
(SDXC memory card is used.)
• Check if your PC is compatible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
•
A message prompting to format the card may be displayed when connecting, but do not format.
• If the [Access] displayed on the monitor does not disappear, disconnect the USB connection
cable after turning this unit off.
(P301)
(P53)
310)
357