Playback - Panasonic Lumix DMC-FZ1000 Owner's Manual

2. Preparations before Recording
[Version Disp.]
•
It is possible to check which version of firmware is on the camera.
• Press [MENU/SET] on the version display screen to display information about the software on
the unit.
[Exposure Comp.
Reset]
[No.Reset]
•
The folder number is updated and the file number starts from 0001.
•
A folder number between 100 and 999 can be assigned.
When the folder number reaches 999, the number cannot be reset. We recommend formatting
the card (P31) after saving the data on a PC or elsewhere.
•
To reset the folder number to 100, format the card first and then use this function to reset the
file number.
A reset screen for the folder number will then appear. Select [Yes] to reset the folder number.
[Reset]
•
When the recording setting is reset, the content of the following settings is also reset.
–
The [Face Recog.] setting
•
When the setup/custom settings are reset, the following settings are also reset.
–
The [World Time] (home area) setting
(If the camera is turned on and off, the home area setting screen is displayed.)
–
The settings of [Travel Date] (departure date, return date, location)
–
The [Profile Setup] setting
–
The settings of [Rotate Disp.], [Picture Sort] and [Delete Confirmation] in the [Playback] menu
•
The folder number and the clock setting are not changed.
[Reset Wi-Fi Settings]
•
Always reset the camera when disposing or selling it to prevent personal information saved
within the camera from being misused.
• Always reset the camera after making a copy of personal information when sending the camera
in to be repaired.
[Format]
•
Refer to P31 for details.
An exposure value can be reset when the Recording Mode is
changed or the camera is turned off.
[ON]/[OFF]
Reset the file number of the next recording to 0001.
The recording or setup/custom settings are reset to the default.
Reset all settings in the [Wi-Fi] menu to factory default settings.
¢ Excluding [LUMIX CLUB]
—
(P287)
—
54
¢