Panasonic Lumix DMC-FZ1000 Owner's Manual page 252

12. Using the Wi-Fi function
What you can do with the [Wi-Fi] button when connected to Wi-Fi
•
Following items can be selected.
[Terminate the Connection]
[Change the Destination]
[Change Settings for Sending
¢
Images]
[Register the Current Destination
to Favorite]
[Network Address]
¢ This is not displayed when the destination of [Remote Shooting & View], [Playback on TV] or
[Send Images Stored in the Camera] is set to [Printer].
∫
Describing method
When you see a step that says, "Select [Select a destination
from History]." or a similar step, press the cursor buttons to
select [Select a destination from History], and press [MENU/
SET].
•
The camera cannot be used to connect to a public wireless LAN connection.
•
Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless
access point.
•
We strongly recommend that you set an encryption to maintain information security.
•
It is recommended to use a fully charged battery when sending images.
•
When the battery indicator is flashing red, the connection with other equipment may not start or
the connection may be disrupted.
(A message such as [Communication error] is displayed.)
•
When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.
•
Pictures may not be completely sent depending on radio wave conditions. If the connection is
terminated while sending pictures, pictures with missing sections may be sent.
•
Do not remove the memory card or battery or move to an area without any reception
while sending images.
•
The monitor display may become distorted for an instant while connected to the service,
however this will not affect the image being sent.
Terminates the Wi-Fi connection.
Terminates the Wi-Fi connection, and allows you to
select a different Wi-Fi connection.
Refer to P296 for details.
Registering the current connection destination or the
connection method, you can easily connect with the
same connection method next time.
Displays the MAC address and IP address of this unit.
252