Connecting From Your House (Via The Network) - Panasonic lumix DMC-SZ8 Owner's Manual

Connecting from your house (via the network)

You can select the method for connecting to a wireless access point.
¢ WPS refers to a function that allows you to easily configure the settings
related to the connection and security of wireless LAN devices.
To check if the wireless access point you are using is compatible with
WPS, refer to the manual of the wireless access point.
Connection method
[WPS (Push-Button)]
[WPS (PIN code)]
[From List]
Wi-Fi
Save push button type wireless access point that is compatible with
Wi-Fi Protected Setup
Press the wireless access point WPS
button until it switches to WPS Mode.
•
Refer to the wireless access point instruction
manual for details.
Save PIN code type wireless access point that is compatible with Wi-Fi
Protected Setup with a WPS mark.
1
Press 3/4 to select the wireless access point you are
connecting to, and press [MENU/SET].
2
Enter the PIN code displayed on the camera screen into
the wireless access point.
3
Press [MENU/SET].
•
Refer to the wireless access point instruction manual for details.
Select this option when you are not sure about the WPS compatibility, or
when you want to search for and connect to a wireless access point.
•
Refer to P116 for details.
- 115 -
Description of settings
TM
with a WPS mark.
Select connection method
Use button on WPS (Push-Button)
the WPS device
WPS (PIN code)
From List
WPS button
WPS
Cancel Select
e.g.:
Set