Panasonic Lumix DMC-FZ1000 Owner's Manual page 259

12. Using the Wi-Fi function
Connecting to a smartphone/tablet by using the NFC function
Using the NFC "Near Field Communication" function, you can easily transfer data
necessary for a Wi-Fi connection between this camera and the smartphone.
∫
Compatible models
This function can be used with the NFC compatible device with Android (OS version
2.3.3 or higher). (excluding some models)
Preparation:
(On the camera)
•
Set [NFC Operation] to [ON].
1
Launch "Image App" on the smartphone.
2
While [ ] is displayed on the screen of
the smartphone, touch the smartphone to
[ ] of the camera.
3
When the connection confirmation screen
is displayed on the camera, select [Yes].
4
Touch the smartphone to [
camera again.
3
•
Steps through
second time on.
•
It may take time to complete the connection.
•
When the smartphone has connected, an image
of this camera will be displayed on the
smartphone.
•
The connected smartphone is registered to this
camera.
•
If a connection attempt by touching fails, restart
the "Image App", and then display the screen in step
•
If a connection is established during single picture playback, the picture will be transferred
to the smartphone.
(P297)
] of the
4
are not required from the
(P262)
(On your smartphone)
•
Check that your smartphone is a compatible
model.
•
Turn on the Wi-Fi function.
•
Install the "Image App" in advance.
1
again.
259
(P254)