Panasonic Lumix DMC-FZ1000 Owner's Manual page 314

13. Connecting to other equipment
•
Use a battery with sufficient battery power or the AC adaptor (optional) (P323). If the remaining
battery power becomes low while the camera and the printer are connected, the status
indicator blinks and the alarm beeps. If this happens during printing, stop printing at once. If not
printing, disconnect the USB connection cable.
•
Do not disconnect the USB connection cable while [å] (Cable disconnect prohibit icon) is
displayed.
(May not be displayed depending on the type of printer used.)
•
Before connecting or disconnecting the AC adaptor (optional), turn the camera off.
•
Before inserting or removing a card, turn the camera off, and disconnect the USB connection
cable.
Not available in these cases:
•
Motion pictures recorded cannot be printed out.
314