Panasonic Lumix DMC-FZ1000 Owner's Manual page 144

6. Focus and Brightness (Exposure) Settings
When selecting [
When [ ] is selected, you can change the vertical size
and position; when [
horizontal size and position.
Button operation
3/4/2/1
[DISP.]
When selecting [
Press 3/4/2/1 to select the AF area, and then press
[MENU/SET] to set (repeat).
•
The setting is canceled when [MENU/SET] is pressed
again.
•
If you press [DISP.], all the selections will be canceled.
6
Press [Fn3].
∫
Registering the set AF area to [
1
On the screen in step
2
Press 3/4 to select a destination to which the setting will be registered, and
press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
•
Settings registered to [
•
Turning off this unit will return the setting adjusted with [
setting.
• If you press a cursor button when [Direct Focus Area] in the [Custom] menu is set to [ON], the
AF area setting screen will be displayed.
]/[ ]
] is selected, you can change the
Description of operation
Moves the position
Changes the size
(Up to 3 lines)
Restores the default setting
]/[ ]/[ ]/[
FREE
], [
3
on P143, press 3 .
] /[ ] /[ ] will be stored even after this unit is turned off.
]
] or [ ]
]/[ ]/[
144
] back to the default
FREE