Easily Set Aperture/Shutter Speed For Suitable Exposure (One Push Ae) - Panasonic Lumix DMC-FZ1000 Owner's Manual

4. Recording Modes

Easily set aperture/shutter speed for suitable exposure (One Push AE)

Applicable modes:
When the exposure setting is too bright or too dark, you can use one push AE to achieve a
suitable exposure setting.
How to tell if the exposure is not adequate
•
If the aperture values and shutter speed blink red A when
the shutter button is pressed halfway.
•
If the Manual Exposure Assistance is anything other than
when in Manual Exposure mode.
For more details on Manual Exposure Assistance, refer to
P89.
1
Set a function button to [One Push AE].
•
The following step is an example in which [One Push AE] is assigned to [Fn1].
2
(When exposure is not adequate)
Press [Fn1].
-3 -3
4.0 4.0 4.0 4000 4000 4000
• The exposure meter is displayed, and the aperture and shutter speed are changed to give
a suitable exposure.
•
The exposure meter is not displayed in Creative Video Mode.
•
In the following cases, suitable exposure cannot be set.
–
When the subject is extremely dark and it is not possible to achieve adequate exposure
by changing the aperture value or shutter speed
–
When recording using the flash
–
In Preview Mode
•
In Program AE Mode, Program Shift can be canceled by pressing the function button to which
[One Push AE] has been set.
0 0
2 98 98 98
00
(P91)
(P44)
SS SS SS
15 30 60 125
F
2.8 4.0
2.8 60 60 60 0 2
00
92
-3 -3 0 0
2
4.0 4.0 4.0 4000 4000 4000
00
A
250
5.6
98 98 98
98 98 98