Beep] - Panasonic Lumix DMC-FZ1000 Owner's Manual

2. Preparations before Recording

[Beep]

•
When [Silent Mode] is set to [ON], [Beep Volume] and [Shutter Vol.] is set to [OFF].
[Live View Mode]
•
When [Live View Mode] is set to [30fps] the image quality on the recording screen may be
worse than when it is set to [60fps], but this does not affect the recorded image.
•
In a dark environment, the frame rate may become slower.
•
When using the AC adaptor (optional), [Live View Mode] is fixed to [60fps].
[Monitor Display]/
[Viewfinder]
•
It will adjust the monitor when the monitor is in use, and the viewfinder when the viewfinder is in
use.
• Some subjects may appear differently from actuality on the monitor. However, this does not
affect the recorded pictures.
Set the volume for electronic noises and the electronic shutter
noise.
[Beep Volume]:
[u] (High)
[t] (Low)
[s] (OFF)
Set the frame rate of the recording screen (Live View screen).
[30fps]: Reduces the power consumption, extending the
operating time.
[60fps]: Displays movements smoother.
Brightness, color, or red or blue tint of the monitor/viewfinder is
adjusted.
[ ] ([Brightness]):
Adjust the brightness.
[ ] ([Contrast · Saturation]):
Adjust the contrast or clarity of colors.
[ ] ([Red Tint]):
Adjust the red tint.
[ ] ([Blue Tint]):
Adjust the blue tint.
1
Select the settings by pressing 3/4, and adjust with
2/1.
•
Adjusting can also be performed by rotating the rear dial.
2
Press [MENU/SET] to set.
[Shutter Vol.]:
[
[
[
49
] (High)
] (Low)
] (OFF)