Maintenance
Timer
Maintenance Timer
Interval
Maintenance Timer
Reset
Reset Function
Pan/Tilt Reset This option resets the Pan/Tilt functions to the home position.
Shutter/Prism Reset This option resets the Shutter/Prism functions to the home position.
Color Reset This option resets the Color functions to the home position.
Gobo Reset This option resets the Gobo functions to the home position.
Zoom/Frost/
Focus Reset
All Reset This option resets the all the functions to the home position.
Factory Reset
Function
Rogue™ R2 Beam User Manual Rev. 2
This programming level allows the user to change a range of options that control the action of
the maintenance timer.
·
Starting from the Setup screen level, select Maintenance Timer, press <ENTER>.
This option defines the amount of time (hours) that the maintenance timer will count down to.
1. Highlight Interval, press <ENTER>.
2. Select YES or NO, press <ENTER>.
This option resets the maintenance timer.
1. Highlight Remaining Time, press <ENTER>.
2. Select RESET or NO, press <ENTER>.
This programming level allows the user to reset individual functions to the home position.
·
Starting from the Setup screen level, select Reset Function, press <ENTER>.
1. Highlight Pan/Tilt, press <ENTER>.
2. Select YES or NO, press <ENTER>.
1. Highlight Shutter/Prism, press <ENTER>.
2. Select YES or NO, press <ENTER>.
1. Highlight Color, press <ENTER>.
2. Select YES or NO, press <ENTER>.
1. Highlight Gobo, press <ENTER>.
2. Select YES or NO, press <ENTER>.
This option resets the Zoom/Frost/Focus functions to the home position.
1. Highlight Zoom/Frost/Focus, press <ENTER>.
2. Select YES or NO, press <ENTER>.
1. Highlight All, press <ENTER>.
2. Select YES or NO, press <ENTER>.
This reverts the product back to its original factory settings.
1. Starting from the Setup screen level, select Factory Settings, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Operation
-19-