Table of Contents
Advertisement
Updated April 2, 2009
Default:
Remarks:
Note: The last valid value is kept when an invalid value is sent.
Select font for HRI
EIA-232 Syntax:
where: n = the font for the HRI
Default:
Remarks:
Note: The last valid value is kept when an invalid value is sent.
Print PDF417 bar code
EIA-232 Syntax:
where:
Remarks:
n = the print position
n = X'00'
Not Printed
n = X'01'
Above the bar code
n = X'02'
Below the bar code
n = X'03'
Both above and below the bar code.
n = X'00'
Human readable information is normal text associated with the bar code.
GS f n or X'1D66;n'
n = X'00'
Font A
n = X'01'
Font B
n = X'00'
Only resident character sets are used:
v Font A = 10-dots (W) × 20 dots (H) or 1.25 mm × 2.5 mm
v Font B = 12-dots (W) × 24 dots (H) or 1.5 mm × 3.0 mm
GS P data NUL or X'1D;50;data;00'
data
The ASCII representation of the characters to be printed.
Valid only at the beginning of a line. Printing will not start until a X'00' is
received.
This command will increment status byte 6.
The maximum number of characters to be encoded is 1000.
Appendix D. EIA-232 programming information
153
Advertisement
Table of Contents
