Status Summary; Message From The Printer; Status Byte 1 - IBM SUREMARK TF6 User Manual

Ibm printer user manual
Hide thumbs Also See for SUREMARK TF6:
Table of Contents

Advertisement

Status summary

Status is sent to the system for:
v Cash receipt print error. The cover is open or out of paper.
v Printer buffer empty. If enabled, see "Status sent to system" on page 141.
v Document sensor state changed. If enabled, see "Status sent to system" on page
v Cash drawer sensor change. If enabled, see "Status sent to system" on page
v Command has timed out. The printer is waiting for additional bytes to complete
v Nonrecoverable home error.
v Document not inserted after document station was selected.
v Document has exited sensor before document print is finished.
v Flash EPROM load error.
v Memory sector is full.
v Flash Storage is full.
v Printer ID request (extended address command).
v MICR read command.
v MCT read command.
v Flash read command.
v Print buffer being held.
v Ribbon cover sensor change.
v Document feed error.

Message from the printer

A message from the printer has this format:
Bytes Contents
1 - 2
3 - 10 Status bytes 1-8. See the descriptions of each byte in the sections that
11 - n Either 5 bytes of additional status from the "Extended address

Status byte 1

184
SureMark Printers User's Guide
Note: The document station stays selected. The printer will wait for
another document until the station is changed.
141.
141.
the command.
Data count (X'000A' to X'00FF'). The data count includes the two data-count
bytes.
follow.
command-request printer ID" on page 112 command, or up to 246 bytes of
user data that can include:
v MICR data
v User flash data
v MCT data
Bit
Description
0 (LSB)
Command complete (immediate command and flash storage commands). Set
to 1 when the command is complete, except for "Erase flash EPROM sector"
on page 123, for which it is set to 1 when the command is sent. (See bit 7 of
"Status byte 3" on page 185.)
1
Cash receipt right home position. Set to 1 when the print head is in the
customer receipt right home position.
2
Left home position Set to 1 when the print head is in the left home position.
Updated April 2, 2009

Advertisement

Table of Contents
loading

Table of Contents