Table of Contents
Advertisement
Updated April 2, 2009
Setting
Print Mode
Print Station Selected
User-Defined/Resident Character Sets
Code Page
Intercharacter Spacing (Single Byte)
Rotated Characters
Station for line spacing
Line Spacing all stations
Tab Positions
Left Margin
Relative Position
Align Positions
Unidirectional printing
Horizontal Size of Bar Code
Vertical Size of Bar Code
Position of HR
Font for HRI
Error Conditions:
Enable or disable the feed buttons
EIA-232 Syntax:
where:
Default:
Purpose:
Remarks:
Enable or disable the beeper (Models TF6 and TM6 only)
This command is supported only for Models TF6 and TM6.
EIA-232 Syntax:
where:
None
ESC c 5 n or X'1B;63;35;n'
n=0
Enables feed buttons
n=1
Disables feed buttons
n = 0
To disable the feed buttons while in the middle of a transaction.
If the printer is set to have the buttons disabled, the offline tests will also be
disabled. Supported on all models except TI1 and TI2.
ESC BEL n1 n2 or X'1B 07 n1 n2'
n1
Enables or disables beeper.
X'00'
Disable beeper.
X'01'–X'FE'
Timed enable beeper.
X'FF'
Enable beeper.
n2
Sets the beeper volume and tone.
Default Value
00
02
00
01
03
00
02
Six LPI
every 100 dots
00
00
00
00
03
A2
00
00
Appendix D. EIA-232 programming information
143
Advertisement
Table of Contents
