Table of Contents
Advertisement
Notes:
1. Any of the impact printing fonts can be printed double-wide, double-high, or both
2. User-defined characters greater than 9 dots high can not be printed in
3. The portrait document print line is 80.35 mm (3.16 inches) long. There are 474
4. You can print in two densities on the impact printer: 120 half-dots per inch or
100
SureMark Printers User's Guide
double-wide and double-high unless the dot height is more than 9. With Models
TI1 and TI2, you can not print the character double-high if its dot height is more
than 9. For better print quality with double-high characters, set the printer to
unidirectional print mode. (See "Set or cancel unidirectional printing" on page
133.)
landscape mode.
half-dots per line for font A, and 379 half-dots per line for font B. The landscape
print line depends on the size of the document inserted.
150 half-dots per inch. Refer to the description of bits 0 and 1 in "Set print
mode" on page 129 for information about changing the density.
Updated April 2, 2009
Advertisement
Table of Contents
