Accessories For Service Und Detector Testing - Bosch FCP-320 Operation Manual

Conventional Automatic Detectors
5.8

Accessories for Service und Detector Testing

SOLO200 Detector Removal Tool
With its pivoting grip segments and three different
diameters, the SOLO200 Detector Removal Tool is
suitable for the insertion and removal of most fire
detectors.
The plastic caps ensure secure gripping of fire detectors
and thus also protect the detector surface against
damage.
RTL-cap Plastic Caps for the SOLO200 Detector
Removal Tool
Scope of delivery = 2 pieces
SOLO330 Smoke Detector Tester
Use the SOLO330 Smoke Detector Tester for in place
testing of smoke detectors using an aerosol designed to
simulate smoke particles.
SOLO A3-001 Test Aerosol for Optical Smoke Detectors
Spray with 250 ml Test Aerosol for Optical Smoke
Detectors
DU = 12 pieces
SOLO CO Testing Gas
Spray with CO testing gas for multisensor detectors with
C component.
Contents: approx. 4 l compressed gas
DU = 12 pieces
Bosch Sicherheitssysteme GmbH Operation Guide
Accessories | en 21
F.01U.002.707 | 8.0 | 2011.10