Bosch FCP-320 Operation Manual page 22

22 en | Accessories
SOLO461 Heat Detector Tester
The SOLO461 Heat Detector Tester operates with a
battery to direct heated air at heat detector sensors.
It uses a patented CAT™ (Cross Air Technology) system
to focus the air and direct it horizontally at the sensor
regardless of the detector's size or shape.
FME-TESTIFIRE Multi-Stimulus Detector Tester
The FME TESTIFIRE is the first functional test tool for
optical and ionization fire detectors, heat detectors
(fixed temperature and rate-of-rise), carbon monoxide
(CO) detectors, as well as multi sensor detectors and
multi criteria detectors. Testing stimuli (heat, smoke,
and carbon monoxide) are created without using
pressurized aerosol cans or hazardous media. Testing
stimuli are generated at the time of test using safe and
patented processes fuelled by replaceable capsules.
FME-TS3 Smoke Capsule
Smoke Capsule for FME-TESTIFIRE testing tool
FME-TC3 CO Capsule
CO Capsule for FME-TESTIFIRE testing tool
SOLO100 Telescopic Access Pole
The SOLO100 Telescopic Access Pole enables the
installation and replacement of fire detectors at high
ceilings. It can be expanded with up to three SOLO101
Fixed Extension Poles.
The Telescopic Access Pole withstands high voltage
situations and is checked for Safety compliance in
accordance with the requirements of BS EN 61235
Section 12 using an applied voltage of 20 kV.
Length: 1 m to 3.4 m
F.01U.002.707 | 8.0 | 2011.10 Operation Guide
Conventional Automatic Detectors
Bosch Sicherheitssysteme GmbH