Fcs-320-Tm Aspiration Smoke Detector Series And Accessories; Overview - Bosch FCS‑320‑TM Series Operation Manual

Conventional Aspiration smoke detector
FCS-320-TM considerably easier to commission. In addition, the calibration can also be
performed using the FAS‑ASD‑DIAG Diagnostic Software. The initialization phase is therefore
carried out according to or independently of the air pressure as desired.
Pipe system
A pipe system with an overall length of up to 50 m can be connected to FCS-320-TM series
Aspirating Smoke Detectors over a maximum of 12 aspiration points. A maximum of 5
aspiration points can be connected with ROOM·IDENT.
3.5 FCS‑320‑TM Aspiration smoke detector series and accessories
3.5.1

Overview

1
A
B
Overview of FCS-320-TM series aspirating
smoke detectors and accessories
FCS-320-TM series aspirating smoke detectors comprise the following components:
Housing Base
–
–
–
Detection module
–
–
–
–
–
–
Bosch Sicherheitssysteme GmbH
C
Connections for pipe with 25 mm external diameter (input and return)
Pack with cable entries, 1 x M 25 (for cable diameter of 1-18 mm) and 2 x M 20 (for cable
diameter of 1-13 mm)
Screw terminals for securing cables with a thickness of up to 2.5 mm²
Sensitive detection with the latest technology according to the principle of an optical
scattered-light smoke detector with integrated airflow monitoring
Aspiration unit with optimized air routing
Infrared diagnostics port
FCS-320-TM: optical displays for main alarm, malfunction and operation
FCS-320-TM-R: optical displays for fire source identification, main alarm, malfunction and
operation
1 Pipe system
2 Connections to fire panel/power
supply
3 Air-return Pipe
A FAS‑ASD‑DIAG Diagnostic Software
with connection cable
B Cable entries (2 x M20, 1 x M25)
3
C Test pipe
2
Operation guide
Technical specifications | en
2020.04 | 2.1 | F.01U.130.928
15