Accessories; Eol Module For Line Termination According To En; Support Plates For Detector Identification; Sk 400 Protective Basket - Bosch FCP-320 Operation Manual

Conventional automatic detectors
Hide thumbs Also See for FCP-320:
Table of Contents

Advertisement

16
en | Accessories
5

Accessories

5.1

EOL Module for Line Termination According to EN 54-13

FLM-320-EOL2W EOL-Modul
The FLM-320-EOL2W EOL module is a 2-wire moduel for
terminating a conventional line according to EN 54-13.
It detects faults in the line according to EN 54-13 and
transmits a notification to the fire panel display.
For a conventional connection according to EN 54-13 one
line must not contain more than 32 automatic detectors.
5.2

Support Plates for Detector Identification

The support plates are made from 1.8mm thick ABS plastic and are clamped between the
detector base and the ceiling.
TP4 400 Support Plate
The TP4 400 Support Plate is intended for an installation
height up to 4 m and is designed for labels up to a size of
approximately 65 x 34 mm.
TP8 400 Support Plate
The TP8 400 Support Plate is intended for an installation
height up to 8 m and is designed for labels up to a size of
approximately 97 x 44 mm.
5.3

SK 400 Protective Basket

The SK 400 Protective Basket is installed over the detector
and gives the detector substantial protection against
damage.
If the detector is mounted in a sports facility, for example,
the protective basket prevents balls or other sports
equipment from hitting the detector and damaging it.
F.01U.002.707 | 8.0 | 2011.10
Operation Guide
Conventional Automatic Detectors
15 / 4
Bosch Sicherheitssysteme GmbH

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fch-320

Table of Contents