Conventional Automatic Detectors
Figure 4.1 Activating the Removal Protection
Legend
1
2
3
4.6
Detector Removal
Unlocked detector heads are disassembled by turning them to the left and removing them
from the base.
Locked detector heads are disassembled by inserting a screwdriver into the unlocking
opening (Y) so that the bolt is pushed upward; at the same time, the detector head should be
turned to the left (refer to Figure 4.2).
Figure 4.2 Detector Removal (Locked Detector)
Bosch Sicherheitssysteme GmbH
1
X
X
Bolt (X) prior to breaking out
Bolt (X) installed but inactive
Locking activated
Y
Operation Guide
2
X
F.01U.002.707 | 8.0 | 2011.10
Installation | en
15
3
X