Switching Between Pulse And Tone; Forwarding Calls - Comdial R DSU User Manual

GCA70–248
7.3

Switching Between Pulse and Tone

•
To convert to tone while dialing—if the local telephone service is
pulse (rotary),
1. Press # at point in dialing sequence where conversion to tone is
required.
NOTE: Pulse/Tone switching can be programmed into memory keys
by pressing # during number storage.
7.4

Forwarding Calls

•
To forward personal calls to another telephone,
1. Press INTERCOM and dial
2. Dial extension number of telephone to which calls are to be
forwarded.
•
To cancel personal call forward,
1. Press INTERCOM and dial # 05.
•
To forward all calls to another telephone,
1. Press INTERCOM and dial
2. Dial extension number of station to which calls are to be
forwarded.
•
To cancel all-call forward,
1. Press INTERCOM and dial
NOTE: For each personal call received during call forward, you will
hear a ring reminder (short tone burst) to remind you that
calls are being forwarded.
Using The Other Telephone Features
05,
5,
#
5.
Non-LCD Station User's Guide 7 – 3