Secondary Harness Wire Connection Guide; Diagram; Secondary Harness Wiring Guide - Clifford Concept 450 Installation Manual

secondary harness wire connection guide

secondary harness wiring diagram
___
YELLOW/WHITE
H2/1
___
EMPTY
H2/2
___
BLACK/WHITE
H2/3
___
BLUE/WHITE
H2/4
___
EMPTY
H2/5
___
EMPTY
H2/6

secondary harness wiring guide

N N O O T T E E : : For further description of the H2/1 to H2/6 wires, please refer to the Door
Lock Harness Wire Connection Guide section.
h2/1 yellow/white (-) horn honk output (200mA)
This wire is a low current output (200mA) for the horn to sound when the system has
been violated.
h2/3 black/white domelight supervision input (87)
This wire determines the output of the BLACK/WHITE H1/15 wire on the main 18-pin
harness. If the vehicle has a negative domelight circuit, ground this wire; if the vehi-
cle has a positive domelight circuit, attach this wire to a 12 volt constant source.
h2/4 blue/white second unlock output (200mA)
This wire produces a (-) 200mA output for progressive locks in which the driver door
unlocks first and the remaining locks unlock with a second press of the unlock button.
© 2004 directed electronics, inc.
(-) Horn Honk Output (200 mA)
Not Used
Domelight Supervision Input (87)
Second Unlock Output (200 mA)
Not Used
Not Used
7