Table of Contents
Advertisement
remote valet - off/on
Off: The alarm can not be put into valet mode with the remote control.
On: The alarm can be put into valet mode with the remote control.
entry delay - off/on
Off: There is no entry delay when the system has passively armed. The system
will trigger instantly when a door is opened.
On: If the system has passively armed, it will not trigger for 15 seconds after a
door is opened allowing the user to enter the vehicle and disarm the system via
the PlainView 2 Valet switch.
reset to default settings
All system settings (except PIN and remote programming) in the User
Programming grid will be reset to their default factory setting as indicated in
bold lettering.
Press the arm/disarm button of the TX; the siren will chirp twice as confirmation.
panic off/on
Off: The panic feature is not available.
On: The panic feature is available.
auto start setting - off/battery only/temp only/battery and temp
Off: The vehicle will not autostart.
This feature is only available with the IntelliStart option.
Battery: The vehicle will only autostart when the car battery gets low.
Temperature: The vehicle will only autostart at a preset low temperature.
Battery and temperature: The vehicle will autostart with a low car battery or low
temperature.
N N O O T T E E : : Temperature and battery calibration and settings can be made only with the
Cliffnet Wizard.
user selectable features descriptions - column three
The features in this column pertain to programming individual transmitter channels in
custom configurations. Following is an explanation of the features. Program the indi-
vidual transmitter channels following the instructions in programming note #2.
arm/disarm only
The remote control channel programmed into this feature will arm/disarm the
system only.
26
www.directed.com
Hide quick links:
Advertisement
Table of Contents
