System Features Programming; Cliffnet Wizard Pro Installation Software Programming - Clifford Concept 450 Installation Manual

table of zones
When using the diagnostic functions, use the Table of Zones to see which input has
triggered the system. It is also helpful in deciding which input to use when connecting
optional sensors and switches.
LED Flashes
N N O O T T E E : : The Warning Zone response does not report on the LED.
1
2
3
4
5
6
7
8
9
10

system features programming

This system has many features that can be programmed to accommodate the user's
personal preferences and make system installation easier. They are listed in two pro-
gramming grids on the following pages. Many features have default settings that have
been programmed at the factory and are indicated in bold type.
The User Selectable Features grid allows the user and installer to change operational
features through the PlainView 2 Valet. The Installer Selectable Features grid allows
the installer to change input/output functions of the system to integrate with the vehi-
cle's specific characteristics.

cliffnet wizard pro installation software programming

Cliffnet Wizard Pro provides access to all available system features and some that are
not available when manually programming with the Valet switch. Cliffnet Wizard Pro
is compatible with Microsoft Windows 95/98/2000/ME/XP/NT so most program-
ming operations can be accomplished by pointing and clicking with a mouse. This
eliminates the need for programming grids and lengthy programming sequences. For
a complete guide to system programming using the Cliffnet Wizard Pro refer to the
Cliffnet Wizard help menu.
22
Trigger type Input description
Data Proximity Sensor
N/A Not Used
Mux 1 Sensor Input
Instant Door Pin Input
Instant Trunk Pin Input
Instant Hood Pin Input
Instant Ignition Input
Mux 2 Sensor Input
N/A Not Used
N/A Alarm power reset
www.directed.com