User Selectable Features Descriptions - Column Two - Clifford Concept 450 Installation Manual

Car security
Hide thumbs Also See for Concept 450:
Table of Contents

Advertisement

auto lock - off/ignition/rpm
Off: The doors will not lock automatically.
Ignition: The doors will automatically lock three seconds after the ignition is
turned on unless a door is open at that time.
Rpm: The doors will lock when the system sees the engine reach a prepro-
grammed RPM. The H1/4 VIOLET/BLACK or Intellistart must be connected.
auto unlock - off/ignition
Off: The doors will not automatically unlock when the ignition is turned off
Ignition: The doors will automatically unlock as soon as the ignition is turned off.
auto (passive) arm lock - off/on
Off: The doors will not lock when the system passively arms.
On: The doors will lock when the system passively arms. This feature only applies
when passive arming is programmed on.
siren duration - 30/60/90
The system will sound the alarm for the programmed duration (30/60/90
seconds) during an alarm trigger or when the system is put into panic mode.
second unlock - off/on
Off: Second unlock output is pulsed at the same time as the unlock output when
the system is disarmed.
On: Second unlock output is active when the arm/disarm button is pressed with-
in 10 seconds of disarming the system.

user selectable features descriptions - column two

set pin code
This feature allows the setting of the user's personal PIN code. For more infor-
mation, see programming note #5. The factory default PIN code is 2.
select siren sounds
The individual sounds the siren produces during an full trigger alarm can be
customized for owner recognition of an alarm trigger. For more information, see
programming note #3.
fact II - off/on
Off: The alarm will respond to zone inputs indefinitely without bypassing.
On: The alarm will bypass for 60 minutes zones that are triggered three times
within a one hour period.
© 2004 directed electronics, inc.
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Concept 550

Table of Contents