installer selectable features descriptions - column three
rpm programming
Programs the tachometer input for the BlackJax and door locks. For more infor-
mation, see programming note #4.
engine type petrol/diesel
This feature applies only if IntelliStart 4 is installed.
Petrol: The IntelliStart will crank the engine three seconds after the ignition is
turned on or after input on the wait-to-start wires ceases.
Diesel: The IntelliStart will crank the engine 20 seconds after it turns the ignition
on and will ignore the wait-to-start input wires.
N N O O T T E E : : RPM must be reprogrammed after changing this feature.
smart windows program
This feature applies only if SmartWindows is installed.
Enter this feature and then follow the programming instructions included with
SmartWindows.
horn output - pulsed/latched
Pulsed: H2/9 YELLOW/WHITE wire will generate a pulsing (-) output when the
alarm is in full trigger. When arming and disarming the output does not operate.
Latched: H2/9 YELLOW/WHITE wire will generate a constant (-) output when the
alarm is in full trigger. When arming and disarming the output will pulse as per
the standard chirp pulses.
auto immobilization - off/on
Off: Turns the auto immobilization feature off.
On: Turns the auto immobilization feature on.
© 2004 directed electronics, inc.
31