Log List Search/Alarm, Motion Search - Genie EDVRH-4 User Manual

2. Log List Search/Alarm, Motion Search

The logs can be used to search and review directly to a point in time of the recorded data.
Alarm, motion, video loss and system related logs can be searched and played back directly
from the time of the incident.
To start Event Search, press
１.
MENU TAP
ALL
SYSTEM
NETWORK
ALARM
MOTION
VIDEO LOSS
2. Use Up/Down buttons [
[ ] to move NEXT page.
3. Press [ENTER] button to start playback.
<Note> Log list is saved on HDD.
<Note> To save log output, please connect USB memory stick into USB port on front. Then
press Display button on each category to backup Log data. USB Icon will be flashed as
Blue.
pops up, as shown below.
It has a list of all the events since the initial power on procedure of DVR
It shows All Event except for Alarm, Motion, and Video Loss.
It shows NETWORK List.
It shows All Alarm List.
It shows Motion List.
It shows Video Loss List.
] to desired "Time" to playback. Use Left/Right buttons
[Log] button on the front, then Log List Menu
CONDITION
54
DIGITAL VIDEO RECORDER