Network Setup; Ip Setup - Genie EDVRH-4 User Manual

8. Network Setup

The static service consists of an IP address that remains constant for the duration of the contract of
the internet service, whereas the dynamic service consists of an IP address that frequently changes
every time a new connection is made through the provided modem, or recurrently in a given period of
time. Though most internet service providers offer both solutions, this manual will distinguish the two
solutions according to the commonly available service type to configure the DVR for the networking
purposes.

8.1. IP setup

Us
e Direction buttons [
１.
Then, press [ENTER] button to display "Network".
Use Down button [ ] to specify the detail.
２.
Use [-, +] button to change the value.
３.
Save changes and exit the menu, press [ENTER] button.
４.
Exit the menu without making changes, press [CANCEL] button
ITEM
CONFIG
IP Address
Net mask
Gateway
DNS Server
PORT
] to select "NETWORK" menu.
STATIC IP: Edit IP address, Gateway and Netmask.
DHCP: Dynamic Host Configuration Protocol.
It is automatically set on from Local DHCP if there is Local DHCP server (i.e. The
local Router) . if the DHCP is set to ON, the IP address, Gateway and subnet Mask
will be assigned by DHCP server.(i.e.The local area network Router)
Enter the static IP address
Enter the IP address of subnet mask.
Enter the IP address for the internet gateway server.
Verify the name of the domain name system
Select "0000 ~ 9999"
Enter the port number that the client will use to communicate with the DVR
over the internet. The default port is 7000.
It is recommended to use over 1,000.
ADJUSTMENT
37
DIGITAL VIDEO RECORDER