Alarm - Genie EDVRH-4 User Manual

7.2 ALARM

ITEM
RECORD
CAMERA
ALARM BUZZER
ALARM OUT1~2
INPUT
2. Save changes and exit the menu, press Enter button.
Exit the menu without making changes, press [CANCEL] button.
ADJUSTMENT
ALL: Start to record All Alarm "ON" channel if there is any Alarm
signal is triggered.
1:1: Start to record the channel, which Alarm is triggered.
ON: The buzzer Sounds if an alarm is triggered. The buzzer will
sound for the duration of the RECORD TIME. This buzzer related with
Alarm Out. Please configure Alarm Out "ON" for Alarm buzzer.
OFF: Disables the ALARM BUZZER function.
<Note> Press [-] button to stop the buzzer immediately. Stopping the
buzzer does not stop the alarm recording.
Configure which relay will be triggered when an alarm is activated
per camera. Select from four available options:
Video Loss, Motion, Alarm ALL, Each Alarm, System.
<Note> If "System" is selected, the relay will be triggered when System
has problems such as HDD FAIL, Power loss etc.
Press [Cancel] button to stop Alarm Out.
It will be cleared by an order: Alarm>Motion> Video Loss
Change the input type. Use [-, +] button to change the values.
36
DIGITAL VIDEO RECORDER