System Setup; General - Genie EDVRH-4 User Manual

9. System Setup

9.1. General

１. Use Direction buttons [
２. Use Left/Right buttons [
３. Use Down button [ ] to specify the detail.
Use [-, +] button to change the value.
４.
Save changes and exit the menu, press [ENTER] button.
５.
Exit the menu without making changes, press [CANCEL] button.
ITEM
SYSTEM ID
AUTO LOCK
RECORD MODE
] to select "SYSTEM" menu. Then, press [ENTER] button.
] to select on TAP menu
To select the DVR to be controlled with the remote controller, press and hold
the DVR ID button. While holding the DVR ID button, press the appropriate
DVR ID number. For example, enter 05 for DVR ID 05, enter 43 for DVR ID
43, and such.
Set the ID of IR controller on "00" to control DVRs at the same time,
whatever DVR ID are.
The DVR locks all the buttons after three minutes of inactivity like a
Screensaver. The buttons can be unlocked with the user password. Default by
"OFF".
CIF, 4/8/16Ch: Default setting
The system records each camera individually and then multiplexes them.
Each channel records at CIF resolution: 360x240(360x288).
• Field, 4/8/16Ch: The system records each camera individually and then multiplexes
them. Each channel records at Field resolution: 720x240(720x288).
• Frame, 4/8/16Ch: The system records each camera individually and then multiplexes
them. Each channel records at Frame resolution: 720x480(720x576)
ADJUSTMENT
43
DIGITAL VIDEO RECORDER