Disk - Genie EDVRH-4 User Manual

9.4. DISK

ITEM
FORMAT
OVERWRITE
DISK MONITOR
RECORD LIMIT
1. Stop the DVR completely before the disk format.
2. Use [-, +] button to change select device.
* Internal HDD
* USB – Memory Stick
* USB – CD/DVD-RW
* USB – HDD
<Note>
When you format USB-HDD, it is formatted to FAT 32 format type.
3. Use down button [ ] to move
to start formatting.
4. Formatting will begin, and the progress will be displayed at the bottom of the
window. Please not that it takes 10~30 seconds for format a HDD.
5. When formatting is finished, it will display COMPLETE, and also SUCCESS at
the bottom of the window.
Users may select the record policy of the system's internal hard disk drive. By
default, the system's hard disk drive is set to overwrite from the beginning when it
becomes full.
ON: By default, the hard disk drive will overwrite from the beginning when it
becomes full.
OFF: It stops recording after HDD is full.
It stops automatically if HDD failure happens. It starts to "Monitoring" again after
DVR reboot . (Use [-, +] button to stop or start)
Allows you to configure when the DVR automatically deletes all data from HDD. It lefts the
data for below duration from current time.
[NONE 12HOURS
ADJUSTMENT
1DAY~ 6DAYS 1WEEK ~ 4WEEKS -> 30 DAYS ]
46
, then press ["+" or " –"] button
DIGITAL VIDEO RECORDER