Genie 4CH User Manual
  1. Manuals
  2. Brands
  3. Genie Manuals
  4. DVR
  5. 4CH
  6. User manual

Genie 4CH User Manual

H.264 standalone dvr 4ch/8ch/16ch
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
H.264 Standalone DVR
4CH/8CH/16CH

USER MANUAL

1

Advertisement

Table of Contents
loading

Related Manuals for Genie 4CH

Summary of Contents for Genie 4CH

  • Page 1: User Manual

    H.264 Standalone DVR 4CH/8CH/16CH USER MANUAL...

  • Page 2: Table Of Contents

    Chapter one Products Introduce ....................... 5 1.1 Technical Parameter ............................................5 1.2 Performance ..............................................6 Chapter Two Hardware ..........................8 2.1 H.264 standalone 4CH/8CH/16CH DVR ......................................8 2.1.1 Hard disk Installation…………………………………………………………………………………………………………………………………… 8 2.1.2 Rear panel………………………………………………………………………………………………………………………………………………10 2.1.3 Alarm input port…………………………………………………………………………………………………………………………………………15 2.1.4 Alarm output port……………………………………………………………………………………………………………………………………… 17 Chapter Three Operation ........................…188...
  • Page 3 3.8 How to control PTZ ............................................37 3.8.1 Method of connection .........................................37 3.8.2 The method of PTZ control operation....................................37 3.8.3 PTZ control ............................................38 Chapter Four Menu Operation Guide...................... 40 4.1 Menu Navigation ............................................40 4.2 Menu Operation .............................................43 4.2.1 Play Back ............................................43 4.2.2 System Information..........................................44 4.2.3 System Setting ............................................48 4.2.4 Record Control............................................56...
  • Page 4 Power This DVR select the adaptor is DC12V; please make sure the power supply voltage before use the machine. If long time do not use the machine, please turn off the power of DVR machine, and let the electric plug away from power socket; safety This DVR only for indoor use, as for prevent short circuit or electric danger, please do not let the DVR in the raining or humid area.

  • Page 5: Chapter One Products Introduce

    Composite 1.0Vp-p/75Ω,BNC×1, VGA×1 Resolution Preview D1 720×576（PAL） ，720×480（NTSC） CIF 352×288（PAL） ，320×240（NTSC） Recording D1 720×576（PAL） ，720×480（NTSC） CIF 352×288（PAL） ，320×240（NTSC） Bit rate Preview/ recording 4ch 100fps(PAL), 120fps(NTSC 8ch 200fps(PAL), 240fps(NTSC) 16ch 400F/S(PAL), 480F/S(NTSC) Audio input -8dB~22k,RCAx4(4ch), RCAx4(4ch) Audio output -8dB~92dB,RCAx1 Audio decode ADPCM...

  • Page 6: Performance

    Remote control unit Dimension Main board size : 220mm x 112mm Power supply AC110-230V 1.2 Performance Real-time Turn-by-turn analog video output and VGA Storage Internal 1or2 SATA interface, MAX 2TB hard disk monitoring interface, according to TV monitor or VGA function drive, the file of hard disk drive include cover mode monitor to live view in 1/4/8/9/16 or more...
  • Page 7 IR detector. Possess 4ch relay switch alarm output, flexible convenient and fast to achieve alarm linkage and lighting control at site. They’re possess protective circuit in Alarm input and alarm output port, make sure the device not to damaged.

  • Page 8: Chapter Two Hardware

    Chapter Two Hardware 2.1H.264 standalone 4CH/8CH/16CH DVR 2.1.1 Hard disk Installation For the first use, please install the hard disk Remove the screws on both sides of shell extracted from the next cover up connect hard disk and mother board ○...

  • Page 9: Rear Panel

    2.1.2 Rear panel Item Interface Description VIDEO IN 4ch video input AUDIO IN 4ch audio input V-OUT 1ch video output A-OUT 1ch audio output VGA monitor RJ45 for internet USB/ MOUSE First USB for backup or upgrade system of DVR; Second USB for mouse...
  • Page 10 4CH_S Item Interface Description VIDEO IN 4ch video input AUDIO IN 1ch audio input A-IN V-OUT 1ch video output A-OUT 1ch audio output VGA monitor RJ45 for internet USB/ MOUSE First USB for backup or upgrade system of DVR; Second USB for mouse...
  • Page 11 Item Interface Description VIDEO IN 8ch video input AUDIO IN 4ch audio input V-OUT 1ch video output A-OUT 1ch audio output VGA monitor RJ45 USB/ MOUSE First USB for backup or upgrade system of DVR; Second USB for mouse ON/OFF...
  • Page 12 8CH_S Item Interface Description VIDEO IN 8ch video input AUDIO IN 1ch audio input V-OUT 1ch video output A-OUT 1ch audio output VGA monitor RJ45 USB/ MOUSE First USB for backup or upgrade system of DVR；Second USB for mouse ON/OFF Power supply switcher DC-12V Power adaptor port...
  • Page 13 Item Interface Description VIDEO IN 8ch video input AUDIO IN 4ch audio input V-OUT 1ch video output A-OUT 1ch audio output VGA monitor RJ45 USB/ MOUSE First USB for backup or upgrade system of DVR；Second USB for mouse DC-12V Power adaptor port ALARM IN：A alarm input port...
  • Page 14 First USB for backup or upgrade system of DVR；Second USB for mouse ON/OFF Power supply switcher DC-12V Power adaptor port ALARM IN：4CH alarm input port RS-485：A, B ALARM OUT: N1 N2 for alarm output port, every channel connect C and O;COM port is for GND;...

  • Page 15: Alarm Input Port

    16CH_S Item Interface Description VIDEO IN 16ch video input AUDIO IN 4ch audio input V-OUT 1ch video output A-OUT 1ch audio output VGA monitor RJ45 for internet USB/ MOUSE First USB for backup or upgrade system of DVR；Second USB for mouse...
  • Page 16 the NC of alarm detector connect with the input end (alarm) of DVR; when you want to reset the remote alarm of triggered , the +12V power supply of alarm detector supply by DVR, for example, smoke detector. When you select the external power supply, please share the GND with DVR; Alarm input circuit: Alarm inlet connection:...

  • Page 17: Alarm Output Port

    2.1.4 Alarm output port 4 way switching value alarm output, selectable in normally open contact, also selectable in normally closed contact, the external alarm device should be need Vcc;...

  • Page 18: Chapter Three Operation

    Chapter Three Operation Chapter Three Products Introduce 3.１Operation instruction 3.1.1 Remote control AND Front panel keypad...
  • Page 19 Operating instruction Operating instruction KEYpad Name Keypad Name This button is used as “enter” and “ok” key 【POWER】 Power ON/OFF 【ENTER】 【OK】 most circumstances 【DEV】 Select DVR1,2,3,… Switch capital letter/small letter/symbol 【SWITCH】 input on soft keyboard...

  • Page 20: How To Use Mouse Of Dvr(Right Hand)

    【MENU】 Access main menu 【MODE】 Switching of Lens IRIS/FOCUS/ZOOM modes Access/exit from PTZ control under preview Exit operation or enter upper menu 【PTZ】 state Close soft keyboard Volume or number increase/reduction Close current window 【+/-】 【ESC】 Select item of the list Exit from current control Return to last menu 【ZOOM IN/OUT】...
  • Page 21 Change again select frame or motion detection piece mode Click the assemble frame popping to pull down the list In the input frame, can select digit, character, lowercase, block letter, left click mouse on the keyboard of character input, that’s. ← say move back, ＿ say blank Right click mouse, popping the shortcut menu, as follows;...

  • Page 22: Powering On

    To run the ActiveX Control ActiveX special operation, For example, double click the Double click left button certain item of record listed file, then the system will playback the segment record video. Depress the left key and dragging the mouse, banding select Motion detection area, depress right key of mouse and Dragging, cancel the banding select area.

  • Page 23: Shutdown

    3.2.2 Shutdown There are two safety mode for Shutdown A. Pressing the POWER key in 3 second, according to Shutdown warning to stop the all running of DVR-4108, then you can turn off the power key behind the DVR case. B.

  • Page 24: Enter System Menu

    recording). Caution: In some area, the power supply is irregularity, it will cause the DVR-4108 working not normal-operation, the DVR-4108 will be damaged in serious. In this surroundings, suggest select the stabilized voltage supply. 3.3 Enter System Menu How to enter the Menu Mode Press【MENU】key, enter main menu Click【Mouse right key】enter shortcut menu Click【T-RSH】shortcut, enter playback menu...

  • Page 25: Power-Down And Revert

    3.4 Power-down and Revert When the DVR run under Recording, Timing recording, Alarm Recording, if the power of DVR to be turn off or be forced to turn off, and turn on the power again, DVR will automatically save the recording before turn off, and automatically to revert the operating condition before turn off to work on. 3.5 Preview After log in system of DVR, system will automatically directly enter the preview mode In the preview picture, you can see the overprint date, time, channel name, if the date and time is not correct show on the picture, re setting the...

  • Page 26: Manual Recording

    3.6.1 Manual recording Note: Manual recording operational requirement the user should have “recording” permission. Please make sure the hard disk drive has been installed and it has been formatted. 1）Input manual recording operation menu Single click right key of mouse or In main menu=> recording control can into manual recording operation menu. Under preview mode, press REC key or on the Remote controller unit key into recording control operation menu, as follows: 2) The explanation of manual recording operation menu 【manual recording】...
  • Page 27 Four channel playback:【Main menu】 【Record Search】, click the icon of mark file in the red frame as follows; Select the corresponding video channel to search, double click the record file to playback; then move the mouse to the Second video channel to search the record again, double click the record file and playback the record file in it;...

  • Page 28: Recording Setting

    Voice adjustment Close the window menu Note: 1) During playback the Playback Tool will show the file playback speed, channel, timing, playback speed etc. information in the Playback control panel; 2) Can’t same time to select the Fast forward operation function in over 2 channel, only progress in anyone channel; 3) Can drag the Playback Speed toolbar by mouse;...
  • Page 29 External Alarm Recording: Please find the details of it in 3.6.5 in this menu（Alarm setting and Alarm linkage Recording） Normal Schedule Recoding: The default setting is 24hours non-stop recording after the First time to boot the DVR system. Login the menu, can set the Timing of DVR to record continually, that’s recording in the timing that you select in sometime area, find the details setting in 【Main Menu】...

  • Page 30: Video Detection

    【Channel】/【Recording Schedule】Drop-down menu, select the corresponding channel Number/Week to set, select “ALL” can set the all channel function enable in onetime; 【Alarm Recording】Can record 3-5seonds video before the alarm event to occur（the timing depends on the capacity of video streaming）; 【Time Slice】The means the recording mode of that channel currently in some time, “■”...
  • Page 31 1）VIDEO Detection To excessive the video picture, when the system detect the motion event that the sensitivity fit for the preinstall, then motion detection alarm on. Method of Operation: 【Channel】 Select what you want to set the motion detection function channel area; 【Alarm Mode】Select the motion detection mode: Motion Detection;...
  • Page 32 security region. Press <Fn> key to set on security or not, set the on security press direction key to move the green border grid to set the dynamic detection region, after setting, press <ENTER> confirm to exit dynamic detection region setting, if press < ESC> exit dynamic detection region then it will cannel the all security setting.
  • Page 33 select the automatic recording in【Recording Control】; 【Clear Time delay】That means after the dynamic, the recording will be stopped in some time delay, the time unit is in second, the range is 10-300; 【Channel Switcher】When there is an alarm in Invert setting, the single video channel will switch in that selected to start record channel, the time of channel switcher setting in【Local Display】setting;...

  • Page 34: Alarm Setting And Alarm Linkage Recording

    1.During copy the setting what you did before, only copy the same setting what you wan to set. That’s say, the setting of video loss can not be ed to paste to video cover after copied（For example: the cover detection of Channel One only be copied to the others channel’s cover detection, can not be copied into the other mode）, by parity of reasoning.

  • Page 35: Backup Recording File

    【Device Mode】Select normal open/normal close (voltage output); 【Channel Switcher】Invert■setting when there is an alarm event, due to select start to record the channel progress to single channel switching display, select the switching setting time mode in the menu【Output Mode】; 【Recording channel】Select the require recording channel( repeat selectable), when there is an alarm event, the system will automatic to start that channel to record.

  • Page 36: Backup Operation

    3.7.2 Backup operation 【Add】Click the backup dialog box ”Accession ” button, popping “Recording Searching” . Searching the DVR record file according the time, channel, searching mode etc. information, searching information show in the dialog box. One or more file to add selection in one time, after process, the file will be showed in the “file backup”...

  • Page 37: How To Control Ptz

    3.8 How to control PTZ 3.8.1 Method of connection 1）connect RS-485 port of speed dome camera with he DVR PTZ port ; 2）connect the video cable of speed dome with the DVR video input jet ; 3）turn on the power of speed dome after connected mention above; 3.8.2 The method of PTZ control operation 1）...

  • Page 38: Ptz Control

    【Channel】Select the connect channel of camera; 【Protocol type】Select the corresponding brand model protocol of speed dome camera; 【Address】Setting the corresponding ID of speed dome camera; Caution; the ID and protocol setting of DVR should fit for the speed dome camera, other wise, you can not control the speed dome camera through RS-485 of DVR;...
  • Page 39 The rotation of pan driver can supports 4 direction, there is Up, Down, Left and Right. The 【Boundary Scan】 setting move to control the JIONT of speed dome, left margin setting, horizontal shifting move to the another point, to set the right margin.

  • Page 40: Chapter Four Menu Operation Guide

    Chapter Four Menu Operation Guide 4.1 Menu Navigation Main Menu First level Option remarks menu To achieve the function of record file searching and playback, the listing of searching according to the record mode, channel, timing, display the result situation in listing, process the playback after the record file select ed.
  • Page 41 The parameter setting of network ID, video data transmission protocol etc. and the Network function of PPPoE, DDNS. setting The parameter setting of for external alarm output and record response. Alarm setting The dynamic detection parameter setting of sensitivity, region and pre-processing Video (alarm output and start recording) , video loss, blank screen detection etc.
  • Page 42 adjustment According to select revert all or part of it into default delivery setting Revert Attention: user account setting is not the recovery function default Detection backup device Listed the detected device, display the name, mode and capacity etc. Backup the record file into the backup device. File backup Log off, turn off, reboot system operation Turn off system...

  • Page 43: Menu Operation

    4.2 Menu Operation Main menu interface introductions The main menu function includes recording search, system information, system setting, recording control, hard disk drive management, alarm control, Advanced Options, file backup, turn off system. Explanation: The all-following sub-menu setting should to take effect after save, otherwise, the setting invalid. The checkbox be filled means that someone function sleeted, not be filled that means no select some one function.

  • Page 44: System Information

    channel, timing to search, please see the result listed table( please see chapter III 3.6.2) 4.2.2 System Information Sub-system menu: hard disk drive information, log information, version information, on-line user. 4.2.2.1 Hard Disk Drive information Display SATA hard disk drive interface status, mode, all hard disk drive and everyone hard disk drive interface position, total capacity, available capacity etc.
  • Page 45 4.2.2.2 Log Information Show the system log, convenience of customers to see the login log. The log message type can be divided into system operation, setting operation, data management, alarm event, recording operation, user management, clear log file, file operation, setting the time slice of log what you want to search, directly to press Search button, system will display the record log listed, press Page up or Page Down key to search the page turning operation.
  • Page 46 4.2.2.3 Version Information Display the system hardware characteristic, software version and release date code etc information.
  • Page 47 4.2.2.4 Online user To see the LAN user information who log in the local DVR.

  • Page 48: System Setting

    4.2.3 System Setting Sub-Menu: 【 System Setup】 , 【 Encoding Setting】 , 【 Recording Setting】 , 【 PTZ Setting】 , 【 Network Setting】 , 【 Alarm Setting】 , 【 Video Detection】 , 【Local Display】etc. menu. Please see the details of【Recording Setting】,【PTZ Setting】,【Alarm Setting】,【Video Detection】in Chapter III. Attention: System setting must login by who hold the limits to rights...
  • Page 49 4.2.3.1 System Setup 【System Time】Be used for modify the current system date and time of DVR, click the right hand side button to save the modification; 【Date Format】Select the date display format, including year/month/date, month/date/year, date/month/year etc; 【Date separator】There are three different kind of selection in it, “— ” “ / ” “.” , if you select “.” , then the system time will display as: 2008.07.20 【Time Format】Including 24 hours and 12 hours;...
  • Page 50 4.2.3.2 Encoding Setting 【Channel】Select channel Number; 【Encoding Type】Select “audio & video” then the recording file will be audio and video composite streaming, select “video” the streaming will be video only; 【Encoding Size】CIF/Half D1/D1; 【Streaming Control】Including fixed bit rate, dynamic bit rate; 【Encoding Quality】6level video quality, they’re best, well, good, middle, worst, bad;...
  • Page 51 【Time Overlap】 and 【Character Overlap】 Overlap everyone channel encoding, there are time and channel title overlap, can set if you want to overlap where the time and channel overlap in the encoding data, single click the setting button, drag the time title or channel title to good place.
  • Page 52 4.2.3.5 Network Setting...
  • Page 53 【IP Address】Press Up/Down/Left/Right key or input the corresponding numeric key to modify the IP address parameter value ( the IP address setting can be set in this setting item), then set the subnet mask and Default Gateway of the corresponding IP address; 【Server Port】The general default is 7777, according to set the port under the user actual-need (remark: the server port 7777 preserve for UDP port, please do not configure for the others);...
  • Page 54 4.2.3.6 Alarm Setting Set alarm output port, Invert ■ that means selected, press confirm button to save and exit, press cancel button to cancel and exit, manual to turn On/Off the corresponding alarm output port. 4.2.3.7 Video Deteciton Please find the details of it at Chapter III 3.6.4 (Video Detection). 4.2.3.8 Local Display...
  • Page 55 【Channel Name】 Press the channel name modify button, enter the channel name menu, can modify the name of channel, during modify the channel name in local, the WEB or client do not update the new channel name immediately follow the local DVR modify, need to open the channel name to upgrade the channel name in WEB or client;...

  • Page 56: Record Control

    4.2.4 Record Control Please find the details of it at Chapter III 3.6.3 (Recording Setting). 4.2.5 Hard Disk Drive Management Host hard disk drive setting management, enter 【Main Menu】 【Advanced Options】 【Hard disk drive management】. The following pictures show the properties current hard disk drive: type, status, total capacity, capacity, available capacity. The red cross mark means there is not hard disk drive be connected to DVR, the yellow cross mark means there is a connected hard disk drive but it should be formatted, green hook means the hard disk drive can be used.

  • Page 57: Alarm Control

    4.2.6 Alarm Control Please find the details of it at Chapter III 3.6.5 (Alarm Setting and Alarm Linkage Recording). 4.2.7 Advanced Options The Advanced Options including menu: hard disk drive management, user account, system maintenance, output regulation, Revert Default. 4.2.7.1 User Account Management user account properties The user name max character size is 8 character, the beginning and the end of the string is bland invalid, it can not be blank in the middle.
  • Page 58 be modified permission by admin, the other user name can permission modify the password themselves; Modify password: permission to modify the password of user name, select user name, input the new password in the new password and confirm the new password again. Press save button for confirm the password modification. The password can be set from 1-8pcs, the password can not be in blank at the beginning and the end, the middle allow in blank.
  • Page 59 Add user: add user name in group and set the user permission control. Enter add user menu interface, input user name and password, select it which group does belongs to, and select is it multiplex user or not. Multiplex means that user can be used at same time, the user name can be used by some client at same time, “■”...
  • Page 60 There are 3 user name admin,usrer,default in initialization, admin is the highest permission in delivery default setting, and the password is 666666,and the default user name is low permission user under delivery default setting, only can monitoring, playback, backup permission etc. Default：this user is for system internal use, can not be deleted.
  • Page 61 4.2.7.3 System Upgrade Set the item can Autonomous Maintenance. User can set the automatic reboot system themselves, the automatic reboot system need to set the date and time, (please make sure to set the enable function in DVR where longtime no body to look for it. Finally to click the confirm button, otherwise, it will be canceled. User can copy the upgrade firmware software into USB drive, click the “start upgrade”...
  • Page 62 4.2.7.4 Output Adjustment Adjust the VGA output area, brightness, chromaticity and resolution.

  • Page 63: File Backup

    4.2.7.5 Revert Default System revert to the default setting status of Delivery (according to revert the details sleeted in the menu. Attention: Menu color, language, date time format, video system, IP address, user account etc. can not be reverted. 4.2.8 File Backup Please see the details of it at Chapter III 3.7 (The Backup Operation of Recording File ).

  • Page 64: Chapter Five Ie Preview

    Chapter Five IE Preview 5.1 logging on interface 5.1.1 To input the IP address...
  • Page 65 Pretermission IP address is 192.168.0.117...

  • Page 67: System Settings

    5.2 System Settings Point , As the picture ,You can set up language directory,After all to save you set.

  • Page 69: State Control

    5.3 State control In state control you can set reboot server, close server , remote to go up Remote upgrade: let PC file load in the system Log: to inquire sometime the server’s action...

  • Page 71: Chapter Six Faq (Frequently Asked Questions)

    Chapter Six FAQ (Frequently Asked Questions) 01：Why the DVR did not run after connect the power supply? ①Please check the power switch turn on or off at the rear panel of DVR. ②Please check if the turn on DVR operation correct or not? ③If you select the adaptor +12V, 5A or above? (8ch 5A, 16ch 220V 200W) 02：Still stop over on the boot-strap frame? Physical damaged in hard disk drive...
  • Page 72 U drive is not good compatible with the DVR, cause the DVR can not detected it, suggested to try one or two more different kind of U drive in the market; USB interface is not good; The voltage hunting fearfulness during the system firmware upgrade in progress; 07：Why the display color is black and white in TV and VGA monitor? Check the video system is it matching the video input, DVR, TV or VGA monitor, if there is not on all fours, please set the video system mode in auto automatic recognition;...
  • Page 73 ①The recording parameter setting is too low cause the record video quality overall down, sometime appears to mosaic; ②The record video file locates where there is a bad sector in a hard disk drive, it will cause the mosaic raising;...

  • Page 74: Postscript

    D1/HD1/CIF D1/HD1/CIF D1/HD1/CIF Record encoded 1//4/CH 1//4/8CH 1//4/8/16CH Record play PAL:1~25 roll/S；NTSC:1~30 roll/S PAL:1~25 roll/S；NTSC:1~30 roll/S PAL:1~25 roll/S；NTSC:1~30 roll/S Roll rate RCA×4CH RCA×4CH RCA×4CH Audio in Audio out ADPCM ADPCM ADPCM Audio encoded Audio encoded 32Kbps 32Kbps 32Kbps...
  • Page 75 Naway.CAB；symbian v3；symbian v5；Naway-Android；iphone，Blackberry Mobil platform PTZ control PTZ control PTZ control RS485 Communication RS485，USB2.0×2 RS485，USB2.0×2 RS485，USB2.0×2 port 2SATA（maximum 2T） 2SATA（maximum 2T） 2SATA（maximum 2T） Hard Disc Usb mouse，Usb disc backup Usb mouse，Usb disc backup Usb mouse，Usb disc backup USB interface Remote control 12V/3A DC 12V/3A DC 12V/5A DC...
  • Page 76 D1/HD1/CIF Record encoded 1//4/CH 1//4/8CH 1//4/8/16CH Record play PAL:1~25 roll/S；NTSC:1~30 roll/S PAL:1~25 roll/S；NTSC:1~30 roll/S PAL:1~25 roll/S；NTSC:1~30 roll/S Roll rate RCA×1CH RCA×1CH RCA×4CH Audio in Audio out ADPCM ADPCM ADPCM Audio encoded Audio encoded 32Kbps 32Kbps 32Kbps rate Alarm In Alarm Out Manual record，motionrecord and externa...

This manual is also suitable for:

8ch16ch

Table of Contents