Time - Genie EDVRH-4 User Manual

PB DEINTERLACE
RUN ON BOOT
PASSWORD
FACTORY
DEFAULT

9.2. Time

ITEM
DATE
TIME
TIME SYNC
TIME SERVER
<note> Please STOP the recording before Time Setting.
• Frame + CIF : Channel number 1-720x480(720x576) + Channel number 2~ 4/8/16 - :
360x240(360x280)
ON: Reducing image flickering but less picture quality.
OFF: Better picture quality for still image but having flicker for moving picture.
This is the purpose to start REC without pressing REC button when you turn on.
if you choose "OFF", The password window will not be shown except POWER/
SERVICE MENU/ RECORDING STOP/ SCHEDULE RECORDING STOP.
• To restore factory default settings, stop recording and then execute "START" by using
ENTER button.
Enter the Date
Enter the Time
If several DVRS are installed and connected via network, one of the DVRs or
PC may be set as the master clock. This unit will control the date and time for
all of the other units.
ON: It is set as the Slave Clock.
OFF(Default): Master Clock or The unit which does not use Time Sync Function.
Install "DVR TimeSynclnstller.exe ". It starts automatically.
The DVR will communicate though "UDP4014 Port" with Window for
TimeSync at every 10 sec.
Enter the IP of Master clock DVR or PC when the unit is set as [ON] on Time
Sync Menu.
ADJUSTMENT
44
DIGITAL VIDEO RECORDER