Camera Setup - Genie EDVRH-4 User Manual

3. Camera Setup

Use Direction buttons [
1.
display "CAMERA".
2. Use Left/Right buttons [
3. Use Down [ ] button to move specified menu and use Left/Right buttons [
select other item.
Use [-, +] button to change the value.
4.
ITEM
BRIGHTNESS
CONTRAST
COLOR
SENSITIVITY
MOTION GRID
] to select "CAMERA" menu. Then, press [ENTER] button to
] or Number button to select the Camera you wish to configure.
DEFAULT
50%
The brightness of each camera can be adjusted by pressing [-,+] buttons.
50%
The contrast of each camera can be adjusted by pressing [-,+] buttons.
50%
The color of each camera can be adjusted by pressing [-,+] buttons.
10
Level 1: Low sensitivity~ Level 20: High sensitivity.
Use this menu to setup Zones for the motion detection The screen shown below
will overlay the current video image.
Motion zones are set by on – it's covered as cross stripes Screen.
It is divided into 16 Grid and selected by Number button on IR Remote.
: Select All.
: : Cover All.
Motion detected zones will be changed to BLUE Color.
ADJUSTMENT
27
DIGITAL VIDEO RECORDER
] to