Schedule Recording - Genie EDVRH-4 User Manual

5. Schedule Recording

The schedule chart shows a graphical representation of the defined record mode: Mode1~4.
However, the schedules are only displayed if a corresponding schedule has been
configured in the schedule menu.
１. Use Direction buttons [
[ENTER] button to display "Schedule Chart".
２. Use Left/Right
(
３. Use Down button [ ] to select any Day you wish to configure.
It breaks down the days of the week in eight different categories: ALL, SUN, MON, TUE,
WED, THU, FRI and SAT. ALL is for everyday of the week. Daily schedule has priority to ALL.
４. Press [Enter] button you wish to configure. The detailed menu pops up for selected
Day, as shown below.
５. Enter the beginning and end time, then select Record mode to record.
(1) BEGIN: The time of recording start.
(2) END: The time of recording end. The ending time must not be before the starting
time or the same as the starting time. It must be any time over the starting time.
(3) MODE: Up to 4 different recording modes can be pre-determined for schedule
recording. (MODE1 ~ MODE4)
] to select "SCHEDULE" menu. Then, press
buttons [ ]
).
32
to select on
DIGITAL VIDEO RECORDER
TAP menu