Continuous Recording (Normal Recording) - Genie EDVRH-4 User Manual

4. Continuous Recording (Normal Recording)

The DVR comes with a certain preset settings from the factory. Therefore once the
DVR is installed, immediate recording is possible after pressing the record buttons. By
default, audio alarm, motion recording are off.
１. Use Direction buttons [
display "RECORD".
２. Use Direction buttons [
３. Use [-, +] button to change the value.
ITEM
RATE : Recording resolutions is changed to Frame, Field and CIF mode.
<Refer to System >
QUALITY
Select Motion Recording ON or OFF. Camera does not record under normal
MOTION
conditions. It is discussed on EVENT Section.
Select Alarm Recording ON or OFF. Camera does not record under normal
ALARM
conditions. It is discussed on EVENT Section.
<Note> Press [MENU] button on each Item at first line to apply all setting for the rest channel.
5. Save changes and exit the menu, press [ENTER] button.
6. Press [REC] button. Then, the red REC LED lights on the front panel and recording starts.
7. To Record stop, press the " STOP" button on IR remote or on Front Panel.
] to select "RECORD" menu. Then, press [ENTER] button to
] to select the Camera you wish to configure.
Select recording speed for each camera.
Specify the record picture quality for each camera.
ULTRA SUPER
ADJUSTMENT
MIDDLE LOW
HIGH
30
DIGITAL VIDEO RECORDER