Preset & Tour; Custom Functions - Genie EDVRH-4 User Manual

The layout of the PTZ interface conforms to the layout of the front of the DVR or the remote
controller. Menu button is the guide anchor position for all other buttons. When in PTZ
interface mode, all buttons used for the PTZ related operation.
** Please Check below items before using PTZ Camera.
1. RS 422/485 Connection, camera Jumper Setting and etc
2. Set the PTZ Camera ID & MODEL NO at the Display menu
2. Preset & Tour
Button
Set preset position; SPOT OUT on remote controller
Go to preset position; INFO on remote controller
Start Auto Tour; BACKUP on remote controller
PTZ Camera

3. Custom Functions

Button
Please refer to the PTZ manufacture's instruction manual for proper jumper settings to match
the protocols to the DVR.
Move the PTZ into desired location.
Press the Preset button.
Custom 1 will illuminate.
Set the # for the Preset location.
Press Enter to save and exit.
Press Go to button.
Enter the desired Preset # and press Enter.
Press Auto Tour Button.
Press the + button and enter the range of Preset and press Enter.
For Example, Auto Tour Button, +5 will start the tour of 1 ~ 5 presets of the
PTZ custom function 1; DISPLAY on remote controller
PTZ custom function 2; ZOOM on remote controller
PTZ custom function 3; P/T/Z on remote controller
Function
Function
50
DIGITAL VIDEO RECORDER