Specifications; Work Area - Chicago Electric 98839 Set Up, Operating, And Servicing Instructions

Electrical Alternator Type: 2-Pole, Single Phase

Specifications

Output Frequency: 60 Hz
Output: 5,500 Rated Watts / 6,500 Max. Watts
AC Receptacles: 4 NEMA 120V, 20 Amp grounded receptacles
DC Receptacle: 12V Terminal with Cap Screws
Circuit Breakers: 20 Amp, Qty. 2 / 25 Amp, Qty. 2
Fuse Type: F10A250V
Overload Protection: Resettable Circuit Protection for AC outlets, and Fuse for DC outlet
Engine 13 HP / 4-Cycle / Electronic Ignition & Recoil Start
Specifications Engine Speed: 3,600 RPM
Required Fuel Type: Unleaded Gasoline
Fuel Capacity: 6.5 Gal.
Recommended Oil Type: SAE 10W-30
Automatic Low Oil Shut-Down: Yes
EPA and CARB Approved
Weight 175 Pounds
The Emission control System for this generator's engine is warranted for standards set by
the u.S. Environmental Protection Agency and by the california Air Resources Board (also
known as cARB). For warranty information, refer to the back two pages of this manual.
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RuLES AND PREcAuTiONS
Failure to follow all instructions listed below may result in
1. Keep your work area clean and well lit.
accidents.
2. Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases, or dust. Power tools cre-
ate sparks which may ignite the dust or fumes.
SKU 98839 For technical questions, please call 1-800-444-3353.
SPEciFicATiONS
1 NEMA 240V 4 Prong, twist lock receptacle
SAvE ThiS MANuAL
READ AND uNDERSTAND ALL iNSTRucTiONS
electric shock, fire, and/or serious injury.
SAvE ThESE iNSTRucTiONS

WORK AREA

WARNiNG!
Cluttered benches and dark areas invite
REV 09h
Page 2