Chicago Electric 98839 Set Up, Operating, And Servicing Instructions page 19

and squeeze thoroughly to dry. Then, squirt several drops of a light weight oil
onto the Element. Use compressed air to clean the Air Filter Separator. Then
replace the Air Filter Separator, Air Filter Element, and Air Filter Cover. Clean
more often under dusty conditions or when airborne debris is present. Replace
Air Filter parts if necessary. (See Figure G.)
After every 100 hours of use:
c.
the Spark Plug Wire (36A). Use the accessory Spark Plug Wrench Kit (86A) to
remove the old Spark Plug. Install a new Spark Plug. Then, replace the Spark
Plug Wire. (See Figure G.)
FuEL TANK
(31)
d. Daily: inspect the Fuel Filter (32): To do so, remove the Fuel Tank Cap (34).
Remove the Fuel Filter from the Fuel Tank (31). If necessary, use compressed
air to remove any dirt and debris from the Fuel Filter. Then replace the Fuel
Filter and Fuel Tank Cap. (See Figure h.)
5. When storing the Generator,
tion out of reach of children and other unauthorized people.
6. cAuTiON! All maintenance, service, or repairs not mentioned in this manual
must only be performed by a qualified service technician.
SKU 98839 For technical questions, please call 1-800-444-3353.
Replace the Spark Plug (28A). To do so, remove
FuEL TANK cAP
(34)
FuEL FiLTER
(32)
make sure to store the unit in a clean, dry, safe loca-
FiGuRE i
Page 19