Product Specifications - Chicago Electric 92455 Operating Instructions Manual

Electrical Specifications
VDC Electrical Specifications
Voltmeter Equipped
Display Lights
Generator Type
Gasoline Engine
Fuel Tank Capacity
Estimated Run Time
Weight
This product requires oil and fuel to be added before starting.
Attempting to start the engine without oil WILL ruin the engine and void
the warranty.
Caution: This generator is not intended to power sensitive electronic
equipment without the addition of an appropriate line conditioner
(sold separately).
The Emission Control System for this generator's engine is warranted
for standards set by the U.S. Environmental Protection Agency and by the
California Air Resources Board (also known as CARB). For warranty informa-
tion, refer to the back two pages of this manual.
The engine's carburetor may need to be adjusted by a qualified mechanic
for efficient high-altitude use.
You will need this manual for the safety warnings and precautions, operating, inspec-
tion, maintenance and cleaning procedures, parts list and assembly diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover. Keep
this manual and invoice in a safe and dry place for future reference.
For technical questions, please call 1-800-444-3353.
SKU 92455

PRODUCT SPECIFICATIONS

115 VAC @ 19 Amps Current Output
60 Hz
Continuous/Rated Wattage: 2,200
Peak Wattage: 2,400
Two 115 VAC, 3-Prong Grounding Outlets
One 19 Amp Circuit Breaker
12 VDC @ 10 Amps Current Output
0-150 Volts / 50 Volt Increments
Red (Run)
Brushless / Revolving Field / Self Exciting
Two Pole / Single Phase
5.5 HP / Unleaded Gasoline Powered
Recoil Start / 4-Cycle / OHV Air Cooled
163 CC Displacement / 3600 RPM
0.63 Quart (0.6 Liter) Oil Capacity
CARB and EPA Certified
3.96 Gallons (15 Liters) / Includes Fuel Gauge
11.8 Continuous Running Hours
103.5 Pounds
SAVE THIS MANUAL
REV 11/06
Page 2