Yamaha YZF-R6T Supplementary Service Manual page 86

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
Fuel pump assembly
1
Fuel tank drain hose
2
Fuel tank breather hose (except for CAL)
3
Clamp
4
Clip
5
Canister (for CAL)
6
Blance hose (for CAL)
7
Canister hose (for CAL)
8
A Install the O-ring with its lip pointed upward.
B Pass the fuel tank drain hose and fuel tank breather
hose through the clamp.
There needs to be no crookedness in fuel tank drain
hose and fuel tank breather hose between fuel
tank's nipple and clamp.
email: info@motomatrix.co.uk
CABLE ROUTING
C Direction of which is sufficient as the knob of a clip.
D Air opening
E Install the breather hose without projecting canister
nipple out of the breather hose.
F Install the clip with its tab pointed in the downward
direction.
G Install the clip with its tab pointed in the upward
direction.
H Install the roll over valve until it contacts with the fuel
tank's nipple.
I To injector
–14–
SPEC