Changing The Engine Oil - Yamaha YZF-R6T Supplementary Service Manual

Hide thumbs Also See for YZF-R6T:
Table of Contents

Advertisement

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk
CHECKING THE ENGINE OIL LEVEL/

CHANGING THE ENGINE OIL

3-25
Recommended oil
At 5_C (40_F) or higher A
Yamalube 4 (20W40) or
SAE 20W40 type SE motor
oil
At 15_C (60_F) or lower B
Yamalube 4 (10W30) or
SAE 10W30 type SE motor
oil
NOTE:
Before checking the engine oil level, wait a few
minutes until the oil has settled.
4. Start the engine, warm it up for several min-
utes, and then turn it off.
5. Check the engine oil level again.
NOTE:
Before checking the engine oil level, wait a few
minutes until the oil has settled.
EAS00074
CHANGING THE ENGINE OIL
1. Start the engine, warm it up for several min-
utes, and then turn it off.
2. Place a container under the engine oil drain
bolt.
3. Remove:
S bottom cowling
Refer to "COWLINGS".
S coolant reservoir tank
Refer to "CHANGING THE COOLANT".
4. Remove:
S engine oil filler cap 1
S engine oil drain bolt 2
(along with the gasket)
5. Drain:
S engine oil
(completely from the crankcase)
CHK
ADJ

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yzf-r6tcYzf-r6rYzf-r6srYzf-r6rcYzf-r6src

Table of Contents