Yamaha YZF-R6T Supplementary Service Manual page 455

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
Fault code No. 30
Used diagnostic code No. 08 (lean angle cut-off switch)
Inspection operation item and probable
cause
Defective lean angle cut-off switch
The motorcycle has overturned.
Installed condition of the lean angle cut-off
switch
Connected condition of connector
Inspect the coupler for any pins that may
have pulled out.
Check the locking condition of the coupler.
email: info@motomatrix.co.uk
FUEL INJECTION SYSTEM
Symptom The motorcycle has overturned.
Operation item and countermeasure
Replace if defective.
1. Remove the lean angle cut-off switch from the
motorcycle.
2. Connect the lean angle cut-off switch coupler
to the wireharness.
3. Connect the pocket tester (DC 20 V) to the
lean angle cut-off switch coupler as shown.
Tester positive prove ! yellow / green
Tester negative prove ! black / blue
4. When turn the lean angle cut-off switch
approx. 65_, the voltage reading is 1.0 V to 4.0
V.
5. Is the lean angle cut-off switch OK?
Raise the motorcycle upright.
Check the installed area for looseness or
pinching.
If there is a malfunction, repair it and connect it
securely.
Lean angle cut-off switch coupler
Main wiring harness ECU coupler
7-19
FI
Reinstatement
method
Reinstated by
turning the main
switch ON
(however, the
engine cannot be
restarted unless
the main switch is
first turned OFF).
1
2