Adjusting The Shift Pedal - Yamaha YZF-R6T Supplementary Service Manual

BLEEDING THE HYDRAULIC BRAKE SYSTEM/
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk

ADJUSTING THE SHIFT PEDAL

h. Tighten the bleed screw and then release the
brake lever or brake pedal.
i. Repeat steps (e) to (h) until all of the air
bubbles have disappeared from the brake
fluid in the plastic hose.
j. Tighten the bleed screw to specification.
k. Fill the brake fluid reservoir to the proper lev-
el with the recommended brake fluid.
Refer to "CHECKING THE BRAKE FLUID
LEVEL".
WARNING
After bleeding the hydraulic brake system,
check the brake operation.
EAS00136
ADJUSTING THE SHIFT PEDAL
1. Check:
S shift rod length a
Out of specification ! Adjust.
2. Adjust:
S shift pedal position
a. Loosen both locknuts 1 .
b. Turn the shift rod 2 in direction b or c to
obtain the correct shift pedal position.
Direction
Direction
c. Tighten both locknuts.
3-45
CHK
ADJ
Bleed screw
6 Nm (0.6 mSkg, 4.3 ftSlb)
Shift rod length
290 mm (11.42 in)
b Shift pedal is raised.
c
Shift pedal is lowered.