Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk
CONNECTING RODS AND PISTONS
e. Tighten the nut further to reach the specified
When the nut is tightened more than the spe-
cified angle, do not loosen the nut and then
retighten it.
Replace the bolt with a new one and perform
the procedure again.
S Do not use a torque wrench to tighten the
S Tighten the nut until it is at the specified
NOTE:
When using a hexagonal nut, note that the
angle from one corner to another is 60_.
5-77
angle (150_).
WARNING
CAUTION:
nut to the specified angle.
angles.
ENG