Yamaha YZF-R6T Supplementary Service Manual page 305

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk
FRONT FORK
14. Measure:
S front fork leg oil level a
Out of specification ! Correct.
Front fork leg oil level (from the
top of the inner tube, with the inner
tube fully compressed, and without
the spring)
106 mm (4.17 in)
15. Install:
S nut 1
S fork spring 2
S washer 3
S spacer 4
S washer 5
S damper adjusting rod 6
S cap bolt 7
a. Remove the rod puller and rod puller attach-
ment.
b. Install the damper adjusting rod locknut 1
and position it as specified a .
Damper adjusting rod nut position
(from the top of the rod to the top
of the nut) a
11 mm (0.43 in)
c. Set the cap bolt distance b to specification.
Distance b
25 mm (0.98 in)
d. Install the damper adjusting rod, fork spring,
washer (lower), spacer and washer (upper).
NOTE:
Install the fork spring with the smaller pinch a
facing up.
b Larger pitch
4-55
CHAS