Cylinder; Assembling The Rear Brake Master Cylinder - Yamaha YZF-R6T Supplementary Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk
FRONT AND REAR BRAKES
6. Check:
S brake fluid level
Below the minimum level mark a ! Add the
recommended brake fluid to the proper level.
Refer to "CHECKING THE BRAKE FLUID
LEVEL" in chapter 3.
7. Check:
S brake lever operation
Soft or spongy feeling ! Bleed the brake
system.
Refer to "BLEEDING THE HYDRAULIC
BRAKE SYSTEM" in chapter 3.
EAS00610
ASSEMBLING THE REAR BRAKE MASTER

CYLINDER

1. Install:
S brake master cylinder kit
S circlip
S dust boot
2. Install:
S copper washers
S brake hose
CAUTION:
When installing the brake hose onto the
brake master cylinder, make sure that the
brake pipe touches the projection a on the
brake master cylinder.
WARNING
Proper brake hose routing is essential to in-
sure safe motorcycle operation. Refer to
"CABLE ROUTING".
3. Fill:
S brake fluid reservoir
(to the maximum level mark)
Recommended brake fluid
4-32
CHAS
New
30 Nm (3.0 mSkg, 22 ftSlb)
DOT 4