Automatic High Beam - If Equipped - Jeep 2014 Grand Cherokee Owner's Manual

168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
available in the in the Uconnect® system screen. Refer to
"Customer- Programmable Features — Uconnect® Ac-
cess 8.4 Settings" in "Understanding Your Instrument
Panel" for further information.
If your vehicle is equipped with a "Rain Sensitive Wiper
System" and it is activated, the headlights will automati-
cally turn on after the wipers complete five wipe cycles
within approximately one minute, and they will turn off
approximately four minutes after the wipers completely
stop. Refer to "Windshield Wipers And Washers" in this
section for further information.
NOTE: When your headlights come on during the day-
time, the instrument panel lights will automatically dim
to the lower nighttime intensity. Refer to "Lights" in this
section for further information.
Automatic High Beam — If Equipped
The automatic high beam system provides increased
forward lighting at night by automating high beam
control through the use of a digital camera mounted on
the inside rearview mirror. This camera detects vehicle
specific light and automatically switches from high
beams to low beams until the approaching vehicle is out
of view.
NOTE:
• If the windshield or automatic high beam mirror is
replaced, the automatic high beam mirror must be
re-aimed to ensure proper performance. See your local
authorized dealer.
• Broken, muddy, or obstructed headlights and taillights
of vehicles in the field of view will cause headlights to
remain on longer (closer to the vehicle). Also, dirt, film,
and other obstructions (sticker, toll box, etc.) on the
windshield or camera lens will cause the system to
function improperly.