Turning Parkview® On Or Off - With Uconnect® 5.0; Turning Parkview® On Or Off - With Uconnect® 8.4A/8.4An - Jeep 2014 Grand Cherokee Owner's Manual

240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
CAUTION!
• To avoid vehicle damage, ParkView® should only
be used as a parking aid. The ParkView® camera is
unable to view every obstacle or object in your
drive path.
• To avoid vehicle damage, the vehicle must be
driven slowly when using ParkView® to be able to
stop in time when an obstacle is seen. It is recom-
mended that the driver look frequently over his/her
shoulder when using ParkView®.
NOTE: If snow, ice, mud, or any foreign substance
builds up on the camera lens, clean the lens, rinse with
water, and dry with a soft cloth. Do not cover the lens.
Turning ParkView® On Or Off — With
Uconnect® 5.0
1. Turn the Radio on.
2. Press the "Settings" button.
3. Press the "Safety & Assistance" soft-key.
4. Press the check box soft key next to "Parkview®
Backup Camera" to enable/disable.
NOTE: A check mark will appear in the selection box to
indicate the system is turned ON.
Turning ParkView® On Or Off — With
Uconnect® 8.4A/8.4AN
1. Press the "Controls" soft-key located on the bottom of
the Uconnect® display.
2. Press the "Settings" soft-key.